2010 - 2015 Chevy Camaro 3.6L V6 Tuning

We can make adjustments for various engine modifications as well as engine swaps.

HP and Torque increases for a stock/bolt on engine will be similar to the following.

3.6L - 6-15HP/15TQ

You will send us your ECM and or TCM or we can provide you with one.

Your computer will be adjusted per your vehicle specifications to get the most out of your vehicle. Fuel and spark tables will be modified accordingly. We can modify almost anything in the computer programming, just some of the things you might want to think about are:

Just some of the things we can do:

• Fan 1 and 2 Temperature On and Off Change

• 90 second fan on at key-off (this feature activates when engine coolant is (Your Thermostat Temp) degrees or greater)

• Delete VATS

• Change Axle Ratio

• Change Tire Size

• Remove speed limiter

• Remove torque management - Torque abuse modes are modified to eliminate bog at launch

• Remove unused engine codes (Leave in notes what you need turned off)

• Emissions Removal For "NOT FOR STREET" rear O2, Cat, EVAP, EGR.

• Remove throttle lag

• Fueling modified for WOT (Wide Open Throttle) performance

• Timing modified for WOT performance

• Raised rev limiter

• Raised shift points

• Removes lag by changing downshift tables

• Transmission line pressure increased

• MAF calibration is year specific

• PE engagement adjusted to reduce KR

• Torque converter lockup tables modified to improve transmission life and eliminate converter lockup hunting

• Correct VIN number

• Enable E85 Flex Fuel

• “Ghost Cam” For Posers