Standalone Engine Wiring Harness For 1997-2006 DBC DBW 4L60E 4L80E 4.8L 5.3L 6.0L
DESCRIPTION:
1. These harnesses are designed for retrofitting 1997 - 2007 Vortec engines (4.8, 5.3, 6.0-Liter) and 4L60E 4L80E transmissions into older muscle cars and street rods or newer non-emissions-controlled vehicles.
Harness allows use of the factory Vortec intake manifold.
2. They are completely plug and play with four wire hookup (switched power, constant power and ground connections required).
3. Harnesses are designed with a sliding grommet seal and 4 - 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard.
4. A sliding grommet seal allows for professional, leak proof installation.
5. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications.
FEATURES:
**. All of our harnesses are built with OEM Quality and better
**. All Harnesses have a High-Quality Grommet installed on the Harness (THAT SLIDES FOR DESIRED MOUNTING)
**. Harnesses receive a quality check before shipment.
**. GM Color Codes. Many Companies Do NOT Use GM Color Codes.
**. High Quality Reinforced Ring Terminals
**. 1200 Degree Fiberglass Braid on All Circuits Ran by Heat
**. All Factory CPA (Connector Position Assurance Locks)
**. 18" ADDED LENGTH FOR EASY COMPUTER MOUNTING
**. All harnesses come with the needed Dash Connections, which include Speedometer, Tachometer, Park Neutral, TCC, Malfunction Indicator, and a DLC Port.
**. The harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions.
How to Install:
1. Remove the old harness from the original car, install a new harness, and dock the corresponding plugs for plug and play.
2. The length of each line is different, and the connectors are different. Please select the appropriate connector for assembly.
3. Professional installation is highly recommended. The whole process takes about 1-2 hours and requires a certain maintenance technology foundation.
DESCRIPTION:
1. These harnesses are designed for retrofitting 1997 - 2007 Vortec engines (4.8, 5.3, 6.0-Liter) and 4L60E 4L80E transmissions into older muscle cars and street rods or newer non-emissions-controlled vehicles.
Harness allows use of the factory Vortec intake manifold.
2. They are completely plug and play with four wire hookup (switched power, constant power and ground connections required).
3. Harnesses are designed with a sliding grommet seal and 4 - 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard.
4. A sliding grommet seal allows for professional, leak proof installation.
5. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications.
FEATURES:
**. All of our harnesses are built with OEM Quality and better
**. All Harnesses have a High-Quality Grommet installed on the Harness (THAT SLIDES FOR DESIRED MOUNTING)
**. Harnesses receive a quality check before shipment.
**. GM Color Codes. Many Companies Do NOT Use GM Color Codes.
**. High Quality Reinforced Ring Terminals
**. 1200 Degree Fiberglass Braid on All Circuits Ran by Heat
**. All Factory CPA (Connector Position Assurance Locks)
**. 18" ADDED LENGTH FOR EASY COMPUTER MOUNTING
**. All harnesses come with the needed Dash Connections, which include Speedometer, Tachometer, Park Neutral, TCC, Malfunction Indicator, and a DLC Port.
**. The harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions.
How to Install:
1. Remove the old harness from the original car, install a new harness, and dock the corresponding plugs for plug and play.
2. The length of each line is different, and the connectors are different. Please select the appropriate connector for assembly.
3. Professional installation is highly recommended. The whole process takes about 1-2 hours and requires a certain maintenance technology foundation.
DESCRIPTION:
1. These harnesses are designed for retrofitting 1997 - 2007 Vortec engines (4.8, 5.3, 6.0-Liter) and 4L60E 4L80E transmissions into older muscle cars and street rods or newer non-emissions-controlled vehicles.
Harness allows use of the factory Vortec intake manifold.
2. They are completely plug and play with four wire hookup (switched power, constant power and ground connections required).
3. Harnesses are designed with a sliding grommet seal and 4 - 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard.
4. A sliding grommet seal allows for professional, leak proof installation.
5. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications.
FEATURES:
**. All of our harnesses are built with OEM Quality and better
**. All Harnesses have a High-Quality Grommet installed on the Harness (THAT SLIDES FOR DESIRED MOUNTING)
**. Harnesses receive a quality check before shipment.
**. GM Color Codes. Many Companies Do NOT Use GM Color Codes.
**. High Quality Reinforced Ring Terminals
**. 1200 Degree Fiberglass Braid on All Circuits Ran by Heat
**. All Factory CPA (Connector Position Assurance Locks)
**. 18" ADDED LENGTH FOR EASY COMPUTER MOUNTING
**. All harnesses come with the needed Dash Connections, which include Speedometer, Tachometer, Park Neutral, TCC, Malfunction Indicator, and a DLC Port.
**. The harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions.
How to Install:
1. Remove the old harness from the original car, install a new harness, and dock the corresponding plugs for plug and play.
2. The length of each line is different, and the connectors are different. Please select the appropriate connector for assembly.
3. Professional installation is highly recommended. The whole process takes about 1-2 hours and requires a certain maintenance technology foundation.